Mighty Fine Donuts Winter 2026

Armoring Up the Fryer Room

Historic Mighty Fine Donuts gets a serious floor.

The Mighty Fine Donuts kitchen finished in chestnut brown urethane cement
ClientMighty Fine Donuts
FloorUrethane cement, 1/8 inch
ColorChestnut brown
Built forHot oil, grease, wet feet

The fryer room at Mighty Fine Donuts had seen better days: layers of old tile, wood and underlayment, worn out by years of a working donut shop.

It needed a floor that could take hot oil, grease, sugar and dropped pans, clean up easy, and stay grippy when it's wet.

The job, step by step

How it went.

The fryer room before, with old tile and wood torn up
01 · The before

Layers on layers

Old tile, wood and underlayment, all of it coming up. We took everything down to the joists.

New subfloor sheeting going down over the framing
02 · A stiff subfloor

Wood has to stop flexing

Wood flexes, and a hard floor on flexing wood cracks. We reinforced the framing, then built the subfloor the way the manufacturer requires: two layers of new 3/4 inch exterior-grade plywood, joints staggered, glued down and screwed every 6 inches. Stiff enough to carry a hard floor.

The long kitchen with the taupe urethane cement base and primer down, drains down the middle
03 · The base

Urethane cement with sand

Over 2,000 pounds of urethane cement, broadcast with sand, about 1/8 inch thick and bonded tight to the new sheeting, primed in taupe. This is the armor.

Chestnut brown finish coat flowing out over the base
04 · The color

Chestnut brown

Then the finish, in a rich chestnut brown that matches the Mighty Fine logo, and the chocolate icing on their famous cream-filled donuts.

The same kitchen finished in chestnut brown urethane cement
05 · Finished

Wall to wall, drain to drain

One seamless chestnut brown floor from the walk-ins to the back room, sloped to the drains and ready for the fryers.

Close-up of the gritty chestnut brown urethane cement surface
06 · Grip you can feel

Safe when it's wet

The sand gives the surface a texture you can feel underfoot, so it stays safe on a wet, greasy morning and still mops clean.

What went into it

The floor, layer by layer.

  1. Old tile, wood and underlayment removed to the joists
  2. Framing reinforced, two layers of 3/4 inch exterior-grade plywood, joints staggered, glued and screwed every 6 inches
  3. Urethane cement base broadcast with sand, about 1/8 inch
  4. Chestnut brown urethane cement finish

A floor built to laugh at a commercial kitchen: thermal shock from hot oil, grease, sugar, dropped pans and heavy daily use. Safe, sanitary and strong for years to come.

If your kitchen floor is taking a beating, we've got the system for it, and we're already looking forward to the next job with this great local team.

More from the blog

Other jobs.

Get a quote

Got a floor like this one?

Send us a few photos, close-ups and one wide shot, and tell us how the space gets used. We'll tell you what it needs first and what we'd put down.

Phone(814) 812-3118
Emailoffice@814epoxyandmore.com
AreaErie, PA and surrounding counties

We only use this to get back to you about your floor. Privacy