Polished concrete Plants · warehouses · retail · homes

The floor is already THERE.

We grind your slab, harden it and polish it to the shine you pick. No coating on top, so there's nothing to peel or chip.

Metal · rough slabs16–18 gritOn a rough slab, glue or an old coating, we start even coarser to cut it all off.

Drag the slider. This is one of our plant floors, and it stopped at 400 grit. Slide past 400 to imagine it at 800, 1,500, or 3,000 for a showstopper.

No coating. No peeling. Just your concrete, at its best.

Nothing on top to chip or lift Densified to harden the surface Dust mop and auto-scrub to keep it
The looks

How deep we cut picks the look.

A light grind keeps the smooth top of the slab. Go deeper and the sand and stones inside the concrete show through. Pick how much you want to see.

Where it goes

From plant floors to living rooms.

Plants and warehouses

Bright, hard and easy to keep.

A polished slab bounces the light around a building, takes forklift traffic and cleans with a riding scrubber. We cut it tight around trench drains, joints and floor penetrations so the shine runs edge to edge.

Forklift trafficBrighter aislesAuto-scrubber clean
Price a plant floor
Polished plant floor cut cleanly around a steel trench drain and pipe penetrations
Retail and commercial

Showroom shine on the slab you already paid for.

Stores, offices and lobbies get a floor that looks finished and stands up to carts and crowds, without the upkeep of tile or the seams of vinyl. This is the Aeropostale store, with every light in the ceiling running down the aisle.

StoresOffices and lobbiesLow upkeep
Price a commercial floor
Johnny from our crew polishing the Aeropostale store floor, with the ceiling lights reflecting in long lines down the aislePolished concrete · Aeropostale
Homes, with color

Dyed deep, polished bright.

Color goes into the concrete itself, then gets polished in. This home went black from the kitchen to the mudroom. It's one of our favorite ways to finish a basement or a new build.

Dyed colorNew buildsBasements
See dyed polishing
Deep black dyed and polished concrete reflecting the room in an open living area
Before and after

Drag the line.

What was under the old floor, and what we polished it into.

BeforeAfter

The 814 logo inlaid in dark grey inside a ring of exposed aggregate in a polished floor
Inlays and logos

Put your logo in the floor.

That's ours. We cut the shape, set the color and polish it in with the rest of the slab, so it's part of the floor, not a sticker on it. It wears like the concrete around it.

See inlays and logos
How we polish

Five steps, one diamond at a time.

Polishing is patience. Skip a grit and the scratches from the last pass stay in the floor forever. Here's how ours goes.

A strip of fully exposed aggregate polished into a lighter concrete floor
Warranty

7 years under foot traffic. Polished concrete is made for foot traffic and light equipment. The guard on top lasts about 7 to 10 years under foot traffic and 3 to 5 under light machinery before it needs a fresh coat. It isn't the floor for heavy machinery.

Polish or coating?

We'll tell you straight.

Polished concrete is a great floor in the right room and the wrong floor in others. Here's how we decide.

Polish it when…

  • The slab is in decent shape and you like the look of concrete
  • You want light, bright aisles and the lowest upkeep
  • Forklifts, carts and foot traffic, without standing water or harsh chemicals
  • You want a floor with nothing on top to peel

Coat it when…

  • The floor gets wet or greasy and needs real slip resistance. Polished concrete can't take a grip additive the way a coating can.
  • Oils, acids or chemicals sit on it. Polish slows stains down but doesn't seal them out.
  • Hot washdowns or a commercial kitchen. That's a job for urethane cement.
  • The slab is badly cracked or patched, and you'd rather not see it
Get a bid

Walk the floor with us.

Tell us about the building and the shine you're after. We'll look at the slab, tell you what it can give you, and price it straight.

Phone(814) 812-3118
Emailoffice@814epoxyandmore.com
AreaErie, PA and surrounding counties

We only use this to get back to you about your floor. Privacy