Sand broadcast into a tinted base, then locked in with a tinted polyaspartic topcoat. No flakes, no swirls: a tough, grippy floor in one clean color, for spaces that care more about getting work done than looking fancy.
Drag across the sand to pull the topcoat. A tinted polyaspartic topcoat, squeegeed over the sand, locks every grain in and turns the floor one solid color, while the grit stays on top for grip. Colors shown are examples; we'll bring the real chart.
Our 14 standard colors for the Slurry System, safety colors included for lines and zones. Need something else? We can tint to a Sherwin-Williams color. Screens never show color exactly, so we bring real samples.
Real sand for grip, locked in solid color. Practical over pretty.
Cracked steps with worn paint, repaired and finished in a solid grey slurry. Grip on every tread, wet or dry.
Fire halls, wash bays, shops, warehouses and steps: anywhere you need grip and toughness more than a showpiece.
The sand is the wear surface and the grip. The topcoat is what holds it. Get the sand right and the topcoat goes on the way it should.
The Slurry System is our hard-working floor. It's the right call for a lot of spaces and the wrong one for a few.
The Slurry System is warrantied for 15 years against delamination indoors. Outdoors, on porches, steps and balconies, it carries 5 years, like everything we put down outside: sun, freeze-thaw and salt are things no prep can control. The topcoat isn't covered by the warranty: it's the sacrificial layer that takes the trucks, boots and salt so the floor underneath doesn't. When it's worn down in the high-traffic lanes, a fresh topcoat brings it back.
We first built this floor for Jim Pretzel, a Vietnam veteran, a longtime friend and one of the first customers to trust us with it. For years we called it the Jim Pretzel System. It still carries his kind of toughness.
Tell us the space, roughly how big, and what it takes every day: trucks, forklifts, water, oil, salt. We'll come look, tell you what it needs and price it straight.
We only use this to get back to you about your floor. Privacy
Design preview only. On the live site this goes straight to office@814epoxyandmore.com.