Epoxy logos Sealed in, not stuck on

Your logo, IN THE FLOOR.

A company brand, a shop name, a crest or a graphic, sealed under a clear coat inside your epoxy floor. Not a sticker on top. Part of the floor, under the shine, built to take traffic for years.

Put your logo on a real 814 floor
Drag the logo to move it
Sealed under clearA clear grout coat buries it and a topcoat goes over that, so the shine runs right across the logo, just like the rest of the floor.

A demo on a real 814 flake floor. Your upload stays in your browser; nothing is sent anywhere. Flip to "Decal laid down" to see the logo before it's sealed: it sits on top and kills the shine. That's what a stick-on floor graphic looks like for its whole life. Ours goes under the clear.

Not a sticker on top. Buried in the layers.

Floor-grade graphic, cut from your file Edges sealed so nothing lifts Under a clear grout coat and the topcoat
How it's built

It goes in while we build the floor.

A logo isn't added after the floor is done. It's set into the system partway through, then a clear grout coat buries it and a topcoat goes over that. Hot tires, chemicals and daily traffic hit the topcoat, not your graphic.

Because it's part of the install, a logo usually adds less than people expect. Send us your file when you ask for a quote.

15yr

The logo carries the same warranty as the floor.

It's buried in the floor, so it's covered like the floor: on a flake or interior metallic floor, that's 15 years against delamination and peeling. The topcoat isn't covered, on any floor we do: it's the sacrificial layer that takes the wear and gets recoated.

TopcoatTakes the wearThe layer your boots, tires and carts actually touch. Sacrificial, and recoated when it wears.
Clear grout coatProtects the logoA full coat of clear between the logo and the topcoat. This is why a recoat never disturbs your logo.
Your logoBuried in the floorSealed at the edges and locked in under the clear, on top of the floor system you picked.

Say the topcoat wears through in 10 years. We lightly prep it and put down a fresh topcoat. The logo is never touched, because it's still under its own coat of clear.

Works with our systems

Pick the floor, then the logo.

Polished concrete? That's a different process: the logo is cut and dyed into the concrete itself. See logos and inlays.

Logos we've put down

Branding people walk on every day.

The JM Eagle logo with a Made in America banner sealed into a gray flake epoxy floorJM Eagle, sealed into flake
A purple and white wolf shield logo for Scholars and Collars sealed under clear in a flake floor, the light running across itScholars and Collars, under the clear
A round Wye Bridge Hobbies logo with a black and white bridge photo, sealed into a green and gold flake floorWye Bridge Hobbies, photo and all
What we need from you

Your file and a spot on the floor.

The best file is a vector: AI, EPS, SVG or PDF. A large, sharp PNG works too. Don't have one? Send what you've got, a photo of your sign or a sketch, and we'll talk through options. Tell us roughly how big and where it goes: the middle of a showroom reads very differently from just inside a door.

  • Your logo fileVector if you have it, or the best image you've got
  • Size and spotHow big, and where people will see it
  • The floor under itFlake, metallic, solid or quartz, and the colors
  • Photo-style art is fineFull-color graphics and photos print onto the decal
Straight talk

What it is, and what it isn't.

The right call when…

  • You want your brand in a lobby, showroom, shop or plant entrance
  • You're already putting in a new epoxy floor
  • You want it to last as long as the floor, with the same warranty, not peel in a year

Not what you need when…

  • Your logo might change next year. It's sealed in for good; changing it means recoating that area.
  • The floor is polished concrete. That's logos and inlays.
  • You only need a temporary graphic for an event. A stick-on decal is cheaper for that.
Get a quote

Send us your logo.

Tell us about the floor and attach your logo. We'll come out, look at the space, and show you how it will sit before anything goes down.

Phone(814) 812-3118
Emailoffice@814epoxyandmore.com
AreaErie, PA and surrounding counties

We only use this to get back to you about your floor. Privacy