Logos and inlays Lobbies · plants · gyms · garages

Put your logo IN THE FLOOR.

Not a decal, not a mat. We set your logo into the floor itself, polished into concrete or locked under a flake system, so it wears like the floor around it.

Polished inlay · a preview, not a proof
Try it

See your logo in the floor.

Upload your logo, or just type your name, and pick the floor. Your file stays on your device.

Floor
Your logo
Around the ring
Ring color

This is a quick preview. Before we cut anything, you get a real proof to sign off on.

Two ways to do it

Polished in, or poured in.

It depends on the floor you want around it.

The 814 logo inlaid in dark grey inside a ring of exposed aggregate in a polished floorPolished inlay · ours

Polished concrete inlay

We cut and stain the logo into the slab, then polish it in with the rest of the floor. There's nothing on top to wear off, so it lasts as long as the concrete does. That's our own logo, ringed in exposed stone.

LobbiesShowroomsPart of the slab
See concrete polishing
The JM Eagle logo with 'Made in America' set into a grey flake floorFlake floor logo · JM Eagle

Epoxy floor logo

Your logo in full color, set into a flake or solid epoxy floor and locked under the same clear topcoat as the rest of the room. Sharp colors, any size, and it cleans like the floor around it.

PlantsGyms and schoolsGarages
See flake floors
Logos we've put down

From the plant floor to the man cave.

The Wye Bridge Hobbies logo, with a photo of the bridge inside it, set into a green and gold flake floor
Wye Bridge HobbiesA photo inside the logo, under the topcoat
The Scholars and Collars purple dog logo set into a flake floor
Scholars and CollarsTheir dog, big and bold
A New York Rangers logo set into a red, white and blue flake floor in a home shop
Home shopEvery garage has a team. This one bleeds Rangers blue.
How it's made

From your file to your floor.

01

Send your logo

Any file you have. A vector file (AI, EPS, SVG, PDF) gives the sharpest edges, but we can work from a good PNG too.

02

Sign the proof

We mock it up at real size with real colors and placement. Nothing gets cut until you say it's right.

03

Cut and color

The logo is laid out on the floor, masked and colored, edge by edge.

04

Lock it in

Polished in with the slab, or sealed under the same clear topcoat as the floor. It wears like the floor, not like a sticker.

Get a bid

Let's put it in your floor.

Tell us about the space and where the logo goes. Email your logo file to office@ and we'll mock it up.

Phone(814) 812-3118
Emailoffice@814epoxyandmore.com
AreaErie, PA and surrounding counties

We only use this to get back to you about your floor. Privacy