Warranty and maintenance In writing, from the crew that installed it

We stand behind EVERY FLOOR.

Every warranty we give covers workmanship and materials. If a floor we installed fails because of our work or our materials, we come back, look at it and fix it at no cost. No runaround, no franchise office, the same local crew. Here's what's covered, what isn't, and how to keep your floor looking new.

Every warranty covers workmanship and materials. The topcoat is built to wear, and we renew it.

15 years workmanship and materials In writing in your contract Same crew that installed it
Why 15 years

The manufacturer gives you a year. We give you fifteen.

The companies that make the coatings back their products for about a year. We put 15 years on our coated floors indoors, on workmanship and materials, because we know two things.

The prep is ours, and it's the hard part. We grind, test and repair every slab before anything goes down. Most coating failures start with prep that got rushed.

These products have proven themselves. Over time they've shown they hold up to normal wear and tear, doing what they're built to do, in normal conditions, when the prep under them is right.

We don't offer a lifetime warranty. Nobody can honestly promise a floor forever, and we'd rather promise what we can stand behind.

Your warranty

What your floor is covered for.

Every warranty covers workmanship and materials, and every one is written into your contract. If anything here doesn't match your paperwork, your contract wins, and we'll walk you through it in plain English.

FloorWarrantyWhat it covers
Coated floors
Flake floors15 yearsPeeling and delamination. Topcoat not covered.
Metallic epoxy15 yearsPeeling and delamination, indoors. Topcoat not covered.
Epoxy quartz15 years15 years indoors. Topcoat not covered.
Slurry System15 yearsDelamination. Topcoat not covered.
STS Shop Tough15 yearsDelamination. Topcoat not covered.
Lite Tough Urethane15 yearsPeeling and delamination on the two-coat floor. Topcoat wear not covered.
Lite Tough Urethane, one coat5 yearsPeeling and delamination only. It's a single coat, so wear isn't covered.
Tread-Plex3 yearsMade for foot traffic and light use, not vehicles or heavy equipment. Worn walking lanes roll right back on.
Urethane cement15 yearsThe bombproof floor for kitchens, food plants and heavy industry.
Epoxy logosSame as the floorThe logo is buried in the floor, so it carries the floor's warranty.
Integrated coveSame as the floorIt's part of the floor it's built with. Nobody walks on it, so under normal wear it usually outlasts the floor. Vinyl cove isn't covered: it isn't as durable.
Crack repair7 yearsIf a crack we filled opens back up through your floor, we come back and fix it. New cracks that form later, and slabs still settling, aren't covered.
OverlaysPart of the systemAn overlay is covered as part of the floor that goes over it.
Outdoors
Anything outdoors5 yearsSteps, porches, patios, balconies and pool decks, on every coated system. Sun, freeze-thaw and salt are things no prep can control, so 5 years is what we can honestly stand behind outside.
Pool deck coatings3 yearsThe cool-to-the-touch deck coating and stain and seal. They take the sun and water head on, south-facing decks most, so plan on a fresh coat every 3 to 6 years.
Concrete
Grind and seal3 yearsMost floors need no attention for 5 years or more.
Polished and dyed polished concrete7 yearsUnder foot traffic, the use it's made for. The guard on top lasts about 7 to 10 years under foot traffic and 3 to 5 under light machinery before a fresh coat. Not the floor for heavy machinery.
Industrial work
Chemical containment1 yearWorkmanship against peeling, blistering and delamination, plus written holiday test results at handoff. Built against your chemical list; expected life 10+ years.
Safety line striping1 yearWorkmanship against peeling and lifting. Forklift aisles last about 3 to 5 years, walkways much longer; we touch up lines as they wear.

Topcoats are never covered on any system: the topcoat is the sacrificial layer that takes the wear, and it gets renewed. That's what the topcoat refresh below is for.

What's covered

  • Failures from our workmanship or our materials, like the coating peeling or letting go of the concrete (delamination), under normal wear and tear
  • We come back, look at it and fix it at no cost to you
  • Every warranty is in writing in your contract
  • You deal with the same local crew that put the floor down, not a call center
  • Moisture coming up through the slab, when we put down a moisture vapor barrier: covered against peeling and delamination like anything else. Your contract says whether yours has one.
  • Sell the building and the warranty goes to the next owner for the years that are left. Keep your contract with the property papers.

What isn't

  • Topcoat wear, scratches and scuffs. The topcoat is built to wear and get renewed.
  • Hot tire pickup. It's a topcoat issue, not the bond to the slab.
  • The concrete itself cracking, shifting or settling under the floor
  • Damage from impacts, dragging or abuse
  • Stains from spills left sitting, and chemicals that weren't part of the spec
  • Sun fading the color of outdoor floors
  • Moisture coming up through the slab on a floor that went down without a moisture vapor barrier
Topcoat refresh

A fresh topcoat, and the floor looks new again.

Around year seven, sooner in a busy lane and later in a quiet room, the topcoat has done its job and worn down. We renew it for a fraction of the price of the original floor. Commercial customers, local colleges among them, have us do it on a schedule.

  1. 01Autoscrub

    We scrub the whole floor with an autoscrubber so it's perfectly clean.

  2. 02Light sand

    The old topcoat is already worn, so the sanding is light and quick. It gives the new coat something to grab.

  3. 03Vacuum

    Every bit of dust comes up before anything goes down.

  4. 04Fresh topcoat

    A new topcoat goes on. The shine and the protection are back, and the floor underneath keeps going.

Worn through to the flake in a heavy lane? We lay down a little fresh flake there before the topcoat. Polished concrete and urethane cement don't need a topcoat refresh.

Cleaning

Keep it clean, and it keeps looking new.

Grit is what wears a topcoat down. Get it off the floor and most of the work is done.

Do

  • Sweep or dust mop often, so grit doesn't grind into the topcoat
  • Mop with soap and water, or Simple Green
  • Power wash if you like: a 25 or 40 degree tip, a foot or more off the floor
  • Wipe up spills. Stains come from things left sitting.
  • Lift heavy things instead of dragging them; use furniture pads
  • In salt season, rinse or mop more often. Deep clean in spring and fall.

Don't

  • Never a 0 or 15 degree power washer tip
  • Vinegar or citrus cleaners: acids dull the finish
  • Bleach or harsh acids
  • Steel wool or abrasive powders
  • Magic Erasers on a gloss floor: they dull it
Questions

Ask the crew that built it.

A question about your warranty, a spot that doesn't look right, or ready for a topcoat refresh? Tell us about it. We're local, and we answer.

Phone(814) 812-3118
Emailoffice@814epoxyandmore.com
AreaErie, PA and surrounding counties

We only use this to get back to you about your floor. Privacy