STS Shop Tough Auto · fab · machine shops

Looks clean. TAKES A BEATING.

A thick, solid-color epoxy floor with a whisper of fine sand and a tough satin topcoat. It keeps the sharp, uniform look shops want without showing every scratch, scuff and repair.

Plain gloss solidSTS Shop Tough
Same floor, two finishesDrag across it like a jack stand.

Every mark lands on both sides at once. On plain gloss, scratches and scuffs catch the light and stay that way. On STS, the fine sand and satin topcoat hide the same damage, so you can hardly see it. Both halves are the same real 814 floor. Colors shown are examples; we'll bring the real chart.

Our 14 standard colors for STS, safety colors included for lines and zones. Need something else? We can tint to a Sherwin-Williams color. Screens never show color exactly, so we bring real samples.

  • White
  • Taupe
  • Sandstone
  • Light Gray
  • Haze Gray
  • Deck Gray
  • Black
  • Tile Red
  • Sky Blue
  • Safety Blue
  • Safety Red
  • Safety Green
  • Safety Orange
  • Safety Yellow

A shop floor that still looks sharp after years of real work.

Solid color, no flakes Hides scuffs and repairs 15-year warranty
Before and after

From beat up to shop ready.

Broken concrete, old coatings and painted lines: it all comes up, gets repaired, and goes back down as one clean, solid floor.

A shop slab with broken, spalled concrete and loose chunks on the floor
01 · Before

Spalled, broken concrete with chunks coming loose.

The same building with a stained bare slab and old green painted lines
02 · Before

Stained slab, old paint lines and a worn patch.

The finished room in a dark gray STS floor with white block wallsAfter · dark gray STS
03 · After
A home shop garage before, with a bare, stained floor and gear piled in the middle
Home shop · before
The same garage finished in a blue-gray STS floor in front of the tool cabinets
After
The finished blue-gray STS floor running to the shop sink and cabinets
After
Where it goes

Built for shops.

For the people who work on the floor all day and want it to look like they take pride in the place.

A big shop with a steel staircase and high ceilings, finished in a solid blue-gray STS floor reflecting the lightsShop floor, blue-gray
Close-up of a gray STS floor showing the fine-sand texture under the satin topcoatUp close: the texture
A pale gray STS floor running through a bright white workroomPale gray
  • Mechanics and auto shopsCreepers, jacks, dropped sockets and hot fluids. It shrugs them off and still looks clean.
  • Fabricators and machine shopsHeavy parts, sparks of daily wear and steel on the floor. Thick epoxy coats take the hits.
  • Industrial workspacesA professional, uniform floor in grays, tans and beiges, without paying for urethane cement where you don't need it.
  • Serious home shops and garagesFor the garage that's really a shop. If you'd rather hide dirt with color, look at flake.
A long light gray STS floor in a working plant, shop lights reflected down the aislePlant floor, light gray
A two-car garage finished in a solid gray STS floor, the drain set flushGarage, gray
A wide industrial room finished wall to wall in dark gray STSWall to wall
How it's built

Thick where it counts.

A thick tinted epoxy base coat, a light dusting of very fine sand, then a thick grout coat that locks the sand in. That's where the strength, the depth and the wear-hiding texture come from. A urethane topcoat with aluminum oxide takes the scratches.

Eye-level close-up of a gray STS floor: solid color with a fine texture under the shop lightsUp close: solid color, fine texture
STS or Slurry?

Two shop floors, one difference: the sand.

Both are solid-color floors with sand in them. How much sand, and how coarse, changes how they grip and how they clean.

STS Shop Tough

  • Very fine sand, lightly broadcast
  • Smooth, mostly solid look with a satin finish
  • Hides scratches, scuffs and repairs
  • Traps less dirt and oil, so it sweeps and mops faster

Slurry System

  • Coarser sand, broadcast until it won't take any more
  • Real grit you can feel underfoot
  • More grip when it's wet or oily
  • Takes a little more scrubbing to clean
Is it right for you?

What it is, and what it isn't.

STS is the middle ground: tougher and better looking in a shop than a basic coating, and easier on the budget than urethane cement.

Great for…

  • Shops that want a clean, solid-color, professional floor
  • Floors that see dropped tools, heavy parts and rolling equipment
  • Hiding patched cracks, scuffs and everyday wear
  • Owners who want shop-grade toughness without the price of urethane cement

Not the right floor when…

  • Boiling water, hot oil, harsh chemicals or thermal shock. That's urethane cement.
  • The floor is always wet and you need real grip. That's the Slurry System.
  • You want color and pattern that hides dirt. That's flake.
  • You want a mirror shine. STS is satin on purpose; that's what keeps the wear from showing.
15yr

Warrantied, in writing.

STS Shop Tough is warrantied for 15 years against delamination. The topcoat isn't covered by the warranty: it's the sacrificial layer that takes the wear so the floor underneath doesn't, and it gets recoated when it's worn.

Get a bid

Tell us about your shop.

Tell us what you work on, how big the floor is and what it takes every day. We'll come look, tell you what it needs, pick the color with you and price it straight.

Phone(814) 812-3118
Emailoffice@814epoxyandmore.com
AreaErie, PA and surrounding counties

We only use this to get back to you about your floor. Privacy